Fix It

Explore » home» door » drivers » handle » how » outside » reinstall » the » to » How to Reinstall the Outside Drivers Door Handle

---

How to Reinstall the Outside Drivers Door Handle

The outside door handle on the drivers side of the car may be removed because it is being replaced, repaired, or the car door itself is undergoing repair. Most amateur mechanics may find that removing a car door handle is easy, but it can be difficult to remember how to reinstall one. Reinstalling the outside drivers side door handle shouldnt take more than a half hour if the door panel has already been taken off on the inside. With a few simple connections the door handle can be secured to the door and used.

Instructions

1

Remove the door panel as necessary. Because you are reinstalling the door handle the panel is probably already off from the inside of the door. If the panel is not off, take a screwdriver and pop the panel out of place.

2

Slip the plastic retaining clip at the end of the rod onto the door handle. Slide the door handle onto the rods in the door so that one connects to the door latch and one connects to the lock.

3

Press the door handle into place on the drivers side door.

4

Secure the door handle in place with nuts and a socket wrench. Tighten the nuts so that the handle is firmly in place.

5

Shut the door and open it to make sure the door handle has been correctly installed and works.

6

Reassemble the inside of the door. Snap or screw the door panel back into place with a screwdriver or the included plastic clips. Replace any speakers, window leavers, or handles.