Fix It

Explore » home» 1995 » a » code » dodge » for » how » intrepid » reset » to » transmission » How to Reset a Transmission Code for a 1995 Dodge Intrepid

---

How to Reset a Transmission Code for a 1995 Dodge Intrepid

After you have retrieved the transmission code on your 95 Dodge Intrepid and had the transmission repaired, the code should reset itself. However, this is not always the case. You might see a warning light on the instrument panel even after the vehicle has been repaired. To reset the transmission code and shut off the light, either disconnect the battery or clear the code using an OBD I scan tool. It is better to use the scan tool because disconnecting the battery will erase all of the computers codes and you will have to reset the radio, clock, alarm and other components.

Instructions

1

Plug the OBD I scan tool into the port under the drivers side dashboard near the steering column. Dont force it in. Just turn it until it fits so you dont damage the pins.

2

Put the key into the ignition and turn it to the "On" position, but dont crank the engine. Wait while the scan tool retrieves the codes.

3

Find and select the "Delete Codes" option. This will clear the transmission codes as well as other trouble codes. The computer is now reset. Unplug the scan tool from the port.

4

Start the engine and verify that all warning lights have shut off of the instrument panel.