Wednesday, August 27, 2014

How to Reset the Honda Code

How to Reset the Honda Code

You can reset the computer codes on your Honda right from your home garage, saving time and money. The trouble codes are sent to the On-Board Diagnostics computer (OBD) from sensors positioned throughout the car. These codes pinpoint the service needs of the vehicle. Read the codes using a handheld computerized device called an OBD scan tool. Once the codes have been read and the repairs done, clear the codes using the OBD tool. This will reset the computer and shut off the lights.

Instructions

    1

    Find a port on the underside of the drivers side dash that is the same size and shape as the connective end of the OBD scan tool. Plug the scan tool into this port.

    2

    Put the key into the Hondas ignition and turn it to the "On" position, taking care not to crank the engine. This will power on the scan tool.

    3

    Wait while the scan tool reads the codes. Find a command on the scan tool that says "Clear Codes" or something similar. When the main menu reappears, the codes have been cleared.

    4

    Unplug the scan tool and start the engine. Verify that all warning and service lights have shut off.

Read here..