Fix It

Explore » home» 1995 » a » do » door » how » i » in » mustang » pins » remove » the » How do I Remove the Door Pins in a 1995 Mustang

---

How do I Remove the Door Pins in a 1995 Mustang

Removing the pins from the door hinges of your Mustang will allow you to remove the door or replace worn bushings on the hinges. When you remove the pins, the door will be unattached and must be supported or it will fall, potentially damaging the door, window, or other components. New pins and bushings are sold at auto parts stores.

Instructions

1

Open the door of your Mustang and slide a jack under the door. Place a piece of wood between the bottom of the door and the jack, and raise the wood with the jack until the door is resting on the wood.

2

Locate the top pin in the center of the door hinge and tap the bottom of the pin with a hammer to push it up. Do not drive the pin out of the hinge; just push it high enough to create a gap between the top of the hinge and the head of the pin.

3

Slide a flat pry bar under the head of the pin and pry it up and out of the hinge as you stabilize the door to keep it from falling over. Move the bar to the bottom pin and pry it out.

4

Lift the door off the hinges and set it aside.