Fix It

Explore » home» 2006 » a » do » how » i » install » jetta » on » replacement » wipers » How Do I Install Replacement Wipers on a 2006 Jetta

---

How Do I Install Replacement Wipers on a 2006 Jetta

Replacing the windshield wiper blades for a Volkswagen 2006 Jetta can easily be done by the owner. If the wiper blades are damaged, dirty or worn, they will not properly clean the windshield which can become a driving hazard. Checking the condition of your wiper blades the same time as you change the oil is a good rule of thumb. There are different styles of wiper blades for the 2006 Jetta that can be purchased from most auto parts stores or a Volkswagen dealership.

Instructions

1

Insert and turn the ignition key to the "On" position but do not start the engine.

2

Press the wiper blade lever to the "On" position and turn the ignition key to the "Off" position. This will position the wipers on the windshield in order to access the blades.

3

Pull the wiper blades away from the windshield into an upright position.

4

Press the blade release button on the tip of the wiper arm.

5

Remove one blade at a time by pulling down on the wiper.

6

Slide the replacement blade onto the wiper arm until it clicks into place. Lower the wiper arm back onto the windshield.

7

Insert and turn the ignition key to the "On" position but do not start the engine.

8

Press the wiper blade lever to the "On" and "Off" position then turn the ignition key to "Off." This will place the wipers back in their normal operating position.