Thursday, January 30, 2014

Explore » home» » » » » » » » » » » » » How Do I Change the Tail Light Lens on an Oldsmobile Ciera

How Do I Change the Tail Light Lens on an Oldsmobile Ciera

Replacing a tail light lens on your Oldsmobile Ciera requires removing the entire tail light assembly. The lens is molded to the rest of the assembly and cannot be removed separately. The assembly comes off the car very quickly and replacement light assemblies are readily available from the dealer or through some auto parts retailers. If you are on a budget, a more affordable option is to source this part through a salvage yard.

Instructions

    1

    Open the trunk of your Oldsmobile and locate the two retaining screws on the inboard edge of the tail light assembly. Remove both screws using a Phillips screwdriver and set them aside for later reuse.

    2

    Pull the tail light assembly away from the body and locate the bulb sockets on the rear of the assembly. Rotate the bulb socket counterclockwise to unlock it from the assembly, then pull the socket and bulb out of the assembly.

    3

    Install the bulb sockets into the rear of the new taillight assembly; rotate them clockwise to lock them in place. Now is a good time to replace any bulbs in the rear that may not be working.

    4

    Position the new tail light assembly on the rear of the car and install the two retaining screws through the tail light, threading them into the body. Tighten the screws with a Phillips screwdriver until they are snug, but do not over-tighten them or you will crack the plastic.

    5

    Repeat the process for the opposite side assembly, if needed. Close the trunk of the car.