Showing posts with label silverado. Show all posts
Showing posts with label silverado. Show all posts

Friday, April 25, 2014

1992 Chevy Silverado 4X4 Troubleshooting

1992 Chevy Silverado 4X4 Troubleshooting

The 1992 Chevy Silverado 4x4 is a pickup truck that allows users to haul or tow heavy trailers or loads. If you are having problems with your 1992 Chevy Silverado, you will need an OBD (on-board diagnostic) machine to check the engine. Gaining access to an OBD machine will require you to rent one from a body shop or auto repair center. After you get the troubleshooting code from the OBD scan tool, you will be able to fix your Silverado.

Instructions

    1

    Look in the footwell of the drivers side of the truck for the 16-pin plug. This runs off of the main wiring harness on the left of the fuse panel.

    2

    Plug the OBD cord into the plug. Turn on the OBD machine and then turn on the ignition in the truck so that the electrical panel comes on.

    3

    Press the "Start" button on your scan tool and then wait for the machine to send you a troubleshooting code.

    4

    Unplug the OBD pin from the truck and then turn the truck off.

    5

    Compare the code against the code explanation in your ODB erence manual to find out the problem with the engine. The erence manual comes with the machine rental. It allows you to look up the troubleshooting code for the specific reason your truck is not working properly.

Read here..

Friday, April 11, 2014

How to Find Part Numbers for My Chevy Silverado

How to Find Part Numbers for My Chevy Silverado

Chevrolet designs, manufactures, and markets the Silverado, a full-sized pick-up truck. The term "Silverado" was first used to describe a trim package on Chevrolet pick-up trucks beginning in 1975. For repair and maintenance of Silverado pick-up trucks, owners need to be able to find the correct parts.

Instructions

    1

    Go to the Auto Parts Giant website. (See Resources.) Select the "Year," "Make," "Model," "Sub model (if applicable)" and "Engine Size" for your Silverado. Press "Go." Type the part that you are looking for into the "Search" box. Press "Search." Review the results and identify the part you are looking for. The part number appears in the product description.

    2

    Go to the Napa website. Click "Select a Vehicle" and click the features that match your Silverado truck, such as "Year." Enter the part you are looking for in the "Part Number Search" box. Press "Search." The results display the part number.

    3

    Launch the Auto Zone web page. Click "Manage My Vehicle" and "Add A Vehicle." Select the details for your Silverado truck and "Look Up Parts." Click on the appropriate category and the specific part to view the part number.

Read here..

Friday, April 4, 2014

How to Test the Wheel Sensor on a 2001 Chevrolet Silverado

2001 Chevrolet Silverados use a hub-mounted wheel sensor system that consists of an electro-magnetic sensor and a notched reluctor wheel on each front wheel. The reluctor wheel spins at the same RPM as the wheel and the electro-magnetic sensor records this information in pulses. The PCM and ABS computers decode this information and use it determine wheel speed. By determining the wheel speed, both computers can tell if a wheel is locked up or spinning faster than the other. In order to diagnose a faulty wheel sensor, you must monitor the data stream with a scan tool and also confirm that each sensor is receiving voltage.

Instructions

    1

    Lift the front portion of vehicle with a jack and support it with jack stands; both front tires must be at least 6-inches off of the ground. Place wheel chocks behind the rear wheels and apply the parking brake.

    2

    Switch the ignition to the ON position and connect a scan tool to the trucks data port under the dashboard below the steering wheel. Navigate to the live data menu and monitor the wheel speed sensors; they should both read zero.

    3

    Turn on the engine and lightly depress the throttle while monitoring the scan tool. The wheel speed sensor output readings should match the speedometer output. If one sensor does not then it is most likely faulty.

    4

    Turn off the engine but leave the ignition on and lie down on a mechanics creeper. Roll underneath the car and examine the wheel speed sensor wires for fraying or cuts.

    5

    Unplug the connector from the wheel speed sensor. Probe the light blue wire for the left-front wheel sensor and the tan wire for the right-front wheel sensor with a digital multimeter. The specified voltage value is 1.8 to 12 volts. If the multimeter reads less than 1.8 volts then find and repair the short in the wire and retest the sensor. If the voltage reading is within specification then replace the wheel speed sensor.

Read here..

Sunday, October 27, 2013

How to Replace the Fuel Injectors in a 2007 Chevrolet Silverado

Many Chevrolet pickup trucks manufactured from 1999 to 2007 are powered by a 4.8-liter, eight-cylinder engine called the Vortec 4800. Such is the engine in the 2007 two-wheel-drive Chevrolet Silverado. The engine uses fuel injectors to deliver fuel to the engine in a precise sequence. If the fuel injector fails, you can replace it but the job requires the removal of several components.

Instructions

    1

    Disconnect the cable for the negative battery terminal with a socket wrench to minimize the possibility of electrical shock. Place a container under the radiator drain and remove the radiator drain plug. Allow the coolant to drain from the radiator and replace the drain plug.

    2

    Remove the electrical connector for the air cooler inlet duct from the turbocharger on the left side of the engine. Detach the electrical connector for the barometric sensor. Remove the electrical connector for the glow plug controller.

    3

    Remove the main electrical wiring harness from the engine and release the clip from the wiring harness. Disconnect the bolts for the wiring harness bracket with a socket wrench and remove the bracket.

    4

    Disconnect the positive crankcase ventilation hose and remove the air cleaner outlet duct on the right side of the engine with a socket wrench. Release the clamp that attaches the air cooler outlet duct to the air intake and remove the outlet duct. Remove the mounting bolts for the fuel filter bracket with a socket wrench and disconnect the fuel filter.

    5

    Remove the fuel injection control module and disconnect the fuel lines to the fuel injectors with a socket wrench. Detach the electrical connectors for the fuel injectors. Remove the mounting bolts for the fuel injector bracket and disconnect the mounting bracket.

    6

    Place injector removal tool, called the J-46594, into a hole for the mounting bolt for the fuel injector bracket and attach a flare nut wrench to the injector removal tool. Pull the injector removal tool away from the fuel injector with the flare nut wrench to remove the fuel injector from its seat on the engine. Remove the injector removal tool from the hole for the mounting bolt.

    7

    Install the new fuel injector. Torque the mounting bolts for the fuel injector bracket to 22 ft. lbs. with a torque wrench. Torque the connecting bolts on the fuel lines for the fuel injectors to 30 ft. Connect the cable for the negative battery terminal with a socket wrench and refill the cooling system.

Read here..