Fix It

In its simplest form, a tow bar is simply a straight piece of rigid material that is attached from the towing vehicle to the vehicle being towed. The idea is that your car or trailer can be towed while not changing the distance to the car that is towing.

Simple Bar

You can make a very simple tow bar by simply cutting a 6-foot piece of 4-by-4 or even a tree trunk with a 4-inch diameter. Drill a 1-inch hole in each end, and take a 10-foot piece of 1-inch nylon cord and run it through the holes. Wrap the cord several times around the piece; tie it off and then tie it securely to the bumpers or toe hitches of each car or trailer. This apparatus should only be used if nothing else is available.

More Sophisticated Bar

Take a 1-inch piece of galvanized pipe and two u-clamps mounted on 7/8-inch bolts. Slide the 7/8-inch bolt on the clamp into the pipe and weld around the end. You can now attach the the u-bolts to the towing hitches on each car with a 3/4-inch bolt. If you want a more structurally sound bar, you can weld a triangular support system.

Some Warnings

Before towing make sure that your bar is well in place. You should use the wooden bar only in an emergency. The galvanized pipe bar is stronger; be sure you have welded it securely.

Some models of the Chevrolet Suburban include tow hooks mounted on the front bumper of the vehicle. These hooks are handy if you own a four wheel drive Suburban, because you can connect the hook to another vehicle if you get stuck, or use them to pull out a friend in a similar situation. If your Suburban doesnt have tow hooks, you can install them on your Suburban in less than 10 minutes with a few tools.

Instructions

1

Sit down in front of the Suburban. Locate the holes in the plastic front valance that show the frame behind it.

2

Insert the tow hook through the plastic valance and into the frame. Align the nuts welded to the tow hooks with the holes in the bottom of the frame.

3

Run a bolt through the bottom of the frame up through the holes in the frame to the tow hook. Tighten it in place with the 1/2-inch ratchet, extension and socket.